AddImageFromFile failed in Azure platform

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,I faced issue when use AddImageFromFile function in Azure platform. I always get return value = 0, which is failed to add image.
The image format that I'm using is BMP.

I did tried other functions such as DrawText, DrawTextBox, DrawLine,
SaveToFile, CompressImage, and etc. All are working perfectly.
I have no clue why only AddImageFromFile will fail. 

By the way, I had used SetTempPath and TestTempPath to check the image folder permission.
I get 1 from both returns. And, texts and lines are drawn and saved successfully.
So, I believe that this is not permission issue.

Please advise if you know how to solve this. Thanks.

Edited by donna - 22 Oct 17 at 9:09AM

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
donna Members Profile Find Members Posts Beginner Joined: 22 Oct 17 Status: Offline Points: 4	Post Options Post Reply Quote donna Report Post Thanks(0) Quote Reply Topic: AddImageFromFile failed in Azure platform Posted: 22 Oct 17 at 4:25AM
	Hi, I faced issue when use AddImageFromFile function in Azure platform. I always get return value = 0, which is failed to add image. The image format that I'm using is BMP. I did tried other functions such as DrawText, DrawTextBox, DrawLine, SaveToFile, CompressImage, and etc. All are working perfectly. I have no clue why only AddImageFromFile will fail. By the way, I had used SetTempPath and TestTempPath to check the image folder permission. I get 1 from both returns. And, texts and lines are drawn and saved successfully. So, I believe that this is not permission issue. Please advise if you know how to solve this. Thanks. Edited by donna - 22 Oct 17 at 9:09AM

Ingo Members Profile Find Members Posts Moderator Group Joined: 29 Oct 05 Status: Offline Points: 3524	Post Options Post Reply Quote Ingo Report Post Thanks(0) Quote Reply Posted: 22 Oct 17 at 2:31PM
	Hi Donna, QuickPDF uses in standard gdi+functionalities for image-handling and rendering. Make sure gdi+ is in system32- or syswow64-path (depends on your dev.environment). You can use different engines (gdi+ isn't a must) but then you have to bind it with QuickPDF-syntax (please read the online reference)... BTW: Always the relevant code snippet about your AddImgaFromFile was helpful for helping hints ;-) Cheers and welcome here, Ingo
	Cheers, Ingo